Product Group » Clinical Products
Luting Material
PROCEM is an eugenol-free cement as paste/paste-system for temporary fixing of crowns, bridges etc. PROCEM remains elastic and can be easily removed.
PROCEM is an eugenol-free easily to process cement. It does not influence the setting of resin based filling and luting materials. It is recommended to use Procem in case of allergies to eugenol.
Procem contains calcium hydroxide and hydroxylapatite.

Working Time 1-2 min
Curing Time 3-6 min


Physical data
  Base Catalyst
Colour Brown White
Viscosity;dyn,Dpa's 200-1000 3000-1500
Setting time at room temperature 1,50 - 3 min
Setting time at 100% humidity 1,10-2,30 min

Packaging Detail
• 1 x 25 g base
• 1 x 25 g catalyst

Temporarily Unavailable
Permanent adhesive luting of indirect restorations (inlays, onlays, crowns, bridges, endodontic posts) made of nobel metal, non-noble metal, PFM | Zirconia, glass ceramic (crowns and bridges) | Fiber reinforced composite (endodontic posts).

- Self adhesive  
- High bond strength on enamel, dentin, metal and ceramics 
- Radiopaque 
- Dual-cure 
- High mechanical properties

1. Remove the temporary restoration and carefully clean off any residual temporary luting cement from the cavity or prepared core. Rinse with a water spray. Dry using oil-free air, avoid over drying the dentine.
2. Verify the accuracy of the fit of the  restoration.
3. Then clean the restoration thoroughly and pretreat as follows:
Etchable glass ceramic: 
Etch the restoration with 5% hydrofluoricacid in accordance with the manufacturer's instructions, rinse thoroughly using a water spray and dry using oil-free air, apply silane (e.g. SilanePrimer) in accordance with the manufacturer's instructions. 
Oxide ceramics, metal sand metal alloys:
Pre-treat in accordance with the manufacturer's instructions. Unless otherwise stated, sand blast the inside of the restoration with aluminumoxide (< 50 μm), clean with alcohol, and dry with 
air that is free of oil and water.
Fiber-reinforced root posts:
Clean the root post with ethanol, dry with oil-freeair, and apply silane (e.g. SilanePrimer) in accordance with the manufacturer's instructions.

Product Code / Package Details
• PRD.ZCEM.TRS Transparent 1x 5ml (9.6gr) + 10x Applicator Tips
• PRD.ZCEM.A2 Universal 1x 5ml (9.6gr) + 10x Applicator Tips
Glass Ionomer Luting Cement

FEATURES: A radiopaque glass ionomer luting cement with prolonged working time followed by snap-set reaction. Combines excellent handling, low film thickness, high strength and contains fluoride. Excellent adhesion of porcelain, ceramic or metal to tooth structure. 

• Cementing of crowns, bridges, inlays or orthodontic brackets. 

  For cementation of crowns, bridges, inlays, onlays, pins, posts and orthodontic appliances
  Low film thickness
  Releasing high fluoride
  Low particul size in order to tightly sealed cementations
  High wear and erosion resistance  
  Excellent biocompability

35 g powder
17ml liquid
Mixing pad & scoop
Contact Us
President Dental GmbH 
Kesselbodenstraße 5, 85391
Allershausen / GERMANY
Tel        :         0049 8166 389 9 820
Fax      :           0049 8166 389 9 821
E-mail  : 

Copyright©2014 Presidentdental All Right Reserved
Web Tasarım    Seo
cold storage

bez çanta

lazer epilasyon

nemlendirme sistemleri

ozon tedavisi

ankara gülüş tasarımı

bebek oyunları

Briquette Prices

ortodontist ankara

seçim çantası

3 katlı cerrahi maske
web tasarım
scaffolding and formwork systems
seo hizmeti