PRESIDENT DENTAL GERMANY

STARK Bulk Fill Composite

STARK is a light-curing flowable composite with high viscosity and great stability, applied by bulk filling technique for the creation of class I and class II restorations in the posterior tooth. Due to the particularly high polymerization depth, the material can be applied and polymerized directly in layers up to 4 mm thick, Thus saving the user a lot of time when filling deep cavities.

ADVANTAGES

✓ Fillings with a layer thickness of up to 4 mm in Class I and II cavities

✓ Bulk filling technique

✓ Universal dentin color

✓ 100% Bis-GMA free = 100% biocompatible

MECHANICAL SPECIFICATIONS

✓ 3-point strength (Mpa): 134

✓ Young Modulus (MPa): 11,090

✓ Vickerhardness (MPa): 740

✓ Compression Strength (MPa): 381

COMPOSITION

Monomer matrix: Diurethane dimethacrylate, tetramethylene dimethacrylate

Total filler: 77 % by weight (57 % by volume) inorganic filler (0.005 – 40 µm)

Light Intensity for curing: ≥ 1200 mW/cm3

Wavelength for curing: 350- 500 nm

Curing time: 20 sec.

STORAGE
Store at 10 – 25 °C (50 – 77 °F). Avoid direct sunlight. Close syringes tightly immediately after use. Let the material reach room temperature before use. After use, retract the plunger of the syringe slightly to prevent the apertures from becoming blocked. Do not use after the expiry date (refer to label on syringe). For use by dentists only. Keep out of children's reach. This product was developed specifically for the described range of application. It must only be used according to the above instructions. The manufacturer will not be held liable for damages caused by incorrect handling or incorrect processing of the material.

PRODUCT CODE
PRD.100.01.STRK.MD - Bulk Fill Composite Medium
Package Details: • 1x 2,0 g syringe + 1x 5pcs application tip

PRD.100.01.STRK.UNI - Bulk Fill Composite Universal
Package Details: • 1x 2,0 g syringe + 1x 5pcs application tip

PRD.100.01.STRK.COM.UNI - Bulk Fill Composite Universal Compile / Capsule
Package Details: • 20 x 0.25 g Compile / Capsule

PRD.100.01.STRK.COM.MD - Bulk Fill Composite Medium Compile / Capsule
Package Details: • 20 x 0.25 g Compile / Capsule

ZENCHROMA Universal Composite

"End The Waste Time..."
"all shades in one syringe"

Zenchroma is a light-curing microhybrid and ultrafine radiopaque filler with the talent to provide high color adaptation to every shade of tooth to which it is applied.

Zenchroma has colour-imitation ability to 16 VITA classical shades with just one shade of composite. It can adapt the shade by imitate the cavity wall surrounding in which applied tooth. Therefore, Zenchroma, eliminates the shade taking procedure, allows minimize dentist' treatment time, reduces the composite inventory in different shades, and it eliminates the wastage of very often unused composite shades and shade-matching procedures.

Zenchroma is available in syringes and compules. The compules are for single use. Please do not reuse them, as this makes it impossible to rule out contamination and germ formation.

COMPOSITION

Glass powder, diurethane dimethacrylate, silicon dioxide, Bis-GMA, tetramethylene dimethacry late.

TOTAL FILLER
75% by weight (53% by volume) inorganic filler (0.005-3.0µm)

INDICATIONS

✓ Direct anterior and posterior restorations in Black’s classes I, II, III, IV and V cavities.

✓ Inlays, onlays and laminate veneers

✓ Extended fissure sealing in molars and premolars

✓ Splinting loose teeth

✓ Adjusting the contours and shades to improve aesthetics

APPLICATION

Before commencing the treatment, clean the tooth with non-fluoride polishing paste. Apply the Zenchroma to cavity using with layering technique.

ADVANTAGE

✓ Esthetic results

✓ Reduced treatment time

✓ Increased efficiency

✓ Reduce waste on seldom used shades

✓ Transparency of> 8%

✓ Perfect shade match between filling and tooth

✓ Different colors create an overall color impression

✓ Shade easily adapts to natural tooth structure

OPAQUER: Suplamentery Material

At the Class III and IV restorations when there is limited surrounding dentition, We recommend to use Zenchroma with OPAQUER which is it's supplementary material. The function of OPAQUER is reducing the shade-matching which caused by cavity of the mouth.

Product Code
PRD.100.01.ZENCHRM.UNIZENCHROMA - Universal Composite Refill
Package Details: • 1x 4gr Refill (Universal)

PRD.100.01.ZENCHRM.OPZENCHROMA - Universal Composite Opaquer Refill
Package Details: • 1x 4gr Refill (Opaquer)

PRD.100.01.ZENCHRM.COM.UNI - Universal Composite Compile/Capsule
Package Details: • 20x 0,30 gr Compile / Capsule

ZENIT Nano - Ceramic Composite Kit

Nano Composite is a composite that can be cured with light and polished with high brightness. It includes ultra-thin radio-opaque porcelain filling that is used for the treatment of adhesive filling. It can be polished with high brightness.
Thanks to its ultra-thin particle filling there can be made homegenous restorations. Chameleon effect enable tehe composite to perfectly adapt to the structure of the teeth. It is compatible with DIN EN ISO 24 049 Zenit Nano Ceramic Composite is presented in easy to use syringe.

Technical Specifications

Vickers Hardness	1088 Mpa
E-Module	18154 Mpa
Compressive Strength	462 Mpa
Flexural Strength	152 Mpa
Tensile Strength	66 Mpa
Shrinkage Rate	1,83%
Radiopacity	220% Al

Indications
• Direct anterior and posterior restorations in black’s class I, II, III, IV and V cavities
• Indirect restorations such as inlays, onlays and laminate veneers
• Extended fissure sealing in molars and premolars
• Cores
• Splinting mobile teeth
• Adjusting the contours and shade to improve aesthetics

Zenit Nano Composite

• Light-curing Nano-Composite with outstanding physical properties and optimized handling

• New advanced formula

• Reduced shrinkage

• For all cavity classes

• Particle size 15–20nm (11% of content – weight)

• Very high filler content of 83% the expanded particle surface and the higher density can bear a higher load

Benefit From

• Excellent handling properties

• Ultrafine filler

• Extremely homogeneous restorations

• Excellent polishability

• Shade of the filling matches the tooth structure

Abrasion Resistance

• Loss of only 60 microns of Nano Composite material after 200,000 mastication cycles in a mastication simulator

• Result: more occlusal force in vitro than in conventional hybrid composites

Less Shrinkage

• Less polymerization shrinkage

• 1,83% average total

• Reduces danger of gaps

Photo courtesy of: Prof. Kunzelmann, University of Munich

• Nano Composite reduces the tensions in the filling

• Thanks to nano-agglomerates, the polymerization shrinkage is decreased

• Therefore, there is less stress in the filling

Scratch resistant filling surface

• Very good polishing behavior

• Nano Composite feels smooth on the tongue

• Low absorption of water

• Color-stable

• No discoloration

Packaging Details
• 7x4gr Syringe (A1, A2, A3, A3.5, B2, A2O, W2)
• 1X5ml Prebond (5th Generation Adhesive System)
• 1x3ml Etching Gel
• Dynamic Flow Refill A2 shade
• 1x1 pcs shade guide
• 1x50 pcs applicator
• 1x4 pcs mixing well
• User guides

ZENIT Nano - Ceramic Composite Refill

Light curing nano ceramic composite with outstanding physical properties and optimized handling for direct restorations of all cavity classes as well as indirect restorations such as inlays and onlays. Nanotechnology has been proven in the chewing simulator...

The high load resistance of ZENIT has been proven in the chewing simulator at the München University dental clinic.The abrasion with pressure load and shearing force was significantly less than that of comparable materi

Refill 4 gr syringe

PRD.100.01.ZN01	A1
PRD.100.01.ZN02	A2
PRD.100.01.ZN03	A3
PRD.100.01.ZN04	A3,5
PRD.100.01.ZN05	A4
PRD.100.01.ZN06	B1
PRD.100.01.ZN07	B2
PRD.100.01.ZN08	B3
PRD.100.01.ZN09	C2
PRD.100.01.ZN10	C3
PRD.100.01.ZN11	A2O
PRD.100.01.ZN12	B2O
PRD.100.01.ZN13	W2
PRD.100.01.ZN14	W3
PRD.100.01.ZN15	UL (Universal Light)
PRD.100.01.ZN16	ER
PRD.100.01.ZN17	UD
PRD.100.01.ZN18	INTR
PRD.100.01.ZN19	W1
PRD.100.01.ZN20	InBlu

New: PRD.100.01.ZN21 Bl

Clinical Cases

ZENIT COLOR - Light Curing Stains on Composite - Basis Kit

The flowable stain system which is cured with is cured with light. Is appropriate for the characterization of the artificial teeth nad composite covered teeth. Zenit color composite stains cases to have the high quality restorations.

Specifications	Benefits
Easy to mix the colors	Eternal rasion possibilities
Creates effects both superficially and deeply	Can be used universally
Can be directly applied with syringe	Easy and exact
Restoration of the baby tooth	Can be wed as colorful composite for baby tooth
Tooth tatoo cases	It remove the prejudge of the children against the dentists

The characterization of the bridges and the crowns, individualization of the sşpecial made resin teeth and the characterization of the dentur based partial or complete prothesis. 10 colors are available

Polymerization
Zenit Color composite can be polarimized by the all traditional curing light system. Before the final polimerization, all the cavity can be filled with Zenit Color. By this way, the generation of the nef dispersion layer can be prevented and the finalization of the object will be easier. Please use curing light system that has the emmission spectrum of 310-500nm. The perfect results can be obtained only if the perfect light source is used. It is crucial that the curing light system should be tested regularly according to the instruction of the manufacturer.

Spektra LED	1 min
Spektra 2000 fast	3 min
Spektra 2000DC-XS/Uni-XS	5 min
Spektramat	3 min
Labolight LV-II/III	5 min
Solidilite EX	5 min

Clinical Cases

Time and work
1-3 minutes depending on the curing light.

Packaging Details
10x1gr Syringe (orange, clear, khaki, dark brown, red, black, white, light brown, yellow, blue)

ZENIT COLOR - Light Curing Stains on Composite - Basis Refill

If the patient is allergen to the any of the compenents of Zenit Color or any hper
sensitivity, it is stricly advised not to use or to use under strict medical control.
The dentist shoultake this situation into consideration before using it.

Composition, Anogramic
36% depending on volume, 50% depending on weight

Glass composition
(the avarage size of the particle is 0,7 um)

Progenic Silica
(the avarage size of the particle is 0,01 um)

Monomers (49% of the weight)
Urethan dimetacrilate
Buthan diol dimetracrilate
Bis-GMA
Addition materials (1% of the weight)
Inhibitors, stabilizers, pigment

1gr Syringe Refill

PRD.01.ZC100BLU	Blue
PRD.01.ZC100ORG	Orange
PRD.01.ZC100CLR	Clear
PRD.01.ZC100KHI	Khaki
PRD.01.ZC100DBR	Dark Brown
PRD.01.ZC100YLW	Yellow
PRD.01.ZC100WHT	White
PRD.01.ZC100LBR	Light Brown
PRD.01.ZC100BLC	Black
PRD.01.ZC100RED	Red

Clinical Cases

ZENIT BRUSH - Pure Kolinsky Dental Composite Brush

Zenit Brush which is produced from pure Kolinsky enables you to make perfect composite retouches. Thanks to its ergonomic wooden handle, high level of clutch is provided and also anebles you to make composite retouches with minimum effort and maximum quality.

There exists 3 different models of brusher for your different operations.

DYNAMIC PLUS - Light Curing Universal Hybrid Composite - Starter Kit

DYNAMIC PLUS is a visible light cure microhybrid composite for anterior and posterior restorations.

DYNAMIC PLUS is based on BIS-GMA-resin and Inorganic filler particles of 0.05-1 cm. The total filler load is 80%, and the total filler volume is 65%.

It is available as single syringes or as kits in various combinations containing a bonding system and application accessories and various number of syringes.

DYNAMIC PLUS Range is a complete range of restorative materials that offer:

Easy handling

Versatility

Clinical performance

The result is the ideal combination of performance and value

Dynamic Plus - Starter Kit Packaging:
*5 x 4 gr Syringe (A1,A2,A3,B1,B2)
*1 x 5 ml Prebond, 1 x 3 ml Etching Gel, Accessories

DYNAMIC PLUS - Light Curing Universal Hybrid Composite - Standard Kit

DYNAMIC PLUS is a visible light cure microhybrid composite for anterior and posterior restorations.

DYNAMIC PLUS is based on BIS-GMA-resin and Inorganic filler particles of 0.05-1 cm. The total filler load is 80%, and the total filler volume is 65%.

It is available as single syringes or as kits in various combinations containing a bonding system and application accessories and various number of syringes.

DYNAMIC PLUS Range is a complete range of restorative materials that offer:

Easy handling

Versatility

Clinical performance

The result is the ideal combination of performance and value

Dynamic Plus - Standard Kit Packaging:
*8 x 4 gr Syringe Shades : A1 , A2 , A3, A3-5 , B2 , B3 , A2Q , I
*1 x 5 ml Prebond ( Bonding Agent )
*2 x 3 ml Etching Gel ( Syringe )
*1 x 50 pcs Applicator
*2 x 10 pcs Acid Tip
*User Guide , User Chart etc.

DYNAMIC PLUS - Light Curing Universal Hybrid Composite - Refill

DYNAMIC PLUS is a visible light cure microhybrid composite for anterior and posterior restorations.

Phsical Data

The treatment depth in 40 sec.	4.5nm
Flexural Strength	120Mpa
Diametric stretching strength	69Mpa
Pressure Strength	400Mpa
Polimerization shrinkage rate	%0.2
Bareol toughness	68
Coefficient f the thermal extention	32 umm-1K-1
Water Apsorption	12ug/g
Solution in water	1ug/g
Radiopasity	strong
Polishing	High shine

Applicatinon Zone
* Class III,IV and V restorations
* Class I and II restorations
* Inlay or onlay cases with direct or indirect method
* Custom Veneers hardened utside the mouth

**Refill 4 gr syringe**
PRD.100.01.102	A1
PRD.100.01.103	A2
PRD.100.01.104	A3
PRD.100.01.105	A3,5
PRD.100.01.106	B1
PRD.100.01.107	B2
PRD.100.01.108	B3
PRD.100.01.109	C2
PRD.100.01.110	C3
PRD.100.01.111	D3
PRD.100.01.112	A2O
PRD.100.01.113	I
PRD.100.01.114	A4
PRD.100.01.115	E
PRD.100.01.116	P
PRD.100.01.117	A3O

DYNAMIC FLOW - Universal Flowable Restorative - Kit

Dynamic Flow is an flowable and restorative composite that can be polimerized with light and has low viscosity. Dynamic Flow that can provide perfect aesthatic with polishing retention presents you the universal technology. It provites excellent polishing and also less light cured.

Key Features
• Excellent biocompatibility with dentin and pulp
• Light curing typer cavity liner, cure extremely hard
• Chemically bonds to adhesives and composites
• Contains calcium hydroxy phosphaste
• Releases calcium, hydroxyl, phosphate and fluoride ions
• Fluoride releasing
• Insoluable in water and oral fluids
• Radiopacity
• Flow-ondemand handling and easy dispensing

Indications

• Restoration of minimally invasive cavity (Class V and Class Ⅲ)

• Pits and fissure sealant

• Base and Liner for direct restoration

• Repair acrylic temporary materials

• Repair of esthetic indirect restoration

Packaging Details
*5x2 gr Syringe (A1,A2,A3,B2,B3)
*20 pcs single use applicator tips

DYNAMIC FLOW - Universal Flowable Restorative - Refill